Elap Encoders Industrial Automation Italy Vietnam_ANS Vietnam


The company

Counters and visualizers

Counters and visualizers

Since 1968 ELAP has been growing in the field of industrial automation, getting specialized in developingmanufacturing and marketing counting and control equipment for industrial automation.
In the years product range has extended to include preset counters and visualizers,single and multi-axis positionersPLC controllers, and a wide choice of positioning sensors: incremental and absolute rotary encoderslinear and rotary potentiometers,incremental transducers and optical scaleswire transducersmagnetic transducersvibration sensors.
The accuracy and reliability featuring ELAP products result from an advancedtechnological research joined to the long experience achieved “on the field”, strictly in touch with the customers, to propose the best solution to each application, developingtailor-made products, when necessary.

Absolute encoders

Single and multi-turn absolute encoders

Absolute Encoders

Absolute Encoders


Absolute encoders always provide the actual position data at the system power on, despite possible shaft rotations; therefore there is no need to reset to the zero point after a power down.
Stout and accurate, Elap single and multi turn absolute encoders are the ideal solution to releave motions on operating machines in all industrial fields.
The wide choice of mechanical solutions allow to fulfil any application requirement. The different available output signals andvoltage supply range make it possible to interfaceElap absolute rotary encoders to any counting system or PLC controller. The encoders high resolution values allow to employ them for applications needing a high accuracy degree.

Encoder MEM – BUS

Single and multiturn encoders with fieldbus

Encoder MEM - BUS

Encoder MEM – BUS

8192 steps/revolution – 13 bit
Multiturn: 65536 giri – 16 bit
Data memory > 21 years
Several configurations available
CANopenProfibus

Encoder MEM – BUS

Encoder MEM

Single and multiturn encoders

Encoder MEM

Encoder MEM

High resolution: 5÷13 bit/revolution x 15 bit revolutions
SSI serial output
Data memory >21 years
Position reset function
Binary or Gray code
Several configurations available

Encoder MEM

Encoder MRE

Single turn absolute encoders

Encoder MRE

Encoder MRE

8÷13 bit resolution, binary or Gray code
SSIparallel or analogue output
NPN or PNP open collector, push-pull output
Different mechanical versions available

Encoder MRE

Encoder EMA

Single turn magnetic encoders

Encoder EMA

Encoder EMA

Several mechanical versions
Supply voltage 5Vdc or 10/24Vdc or 5/24Vdc
Resolution: 4÷ 13 bit, binary code
5V SSI Serial output

Encoder EMA

Encoder MRE

Single turn absolute encoders

Encoder MRE

Encoder MRE

8÷13 bit resolution, binary or Gray code
SSIparallel or analogue output
NPN or PNP open collector, push-pull output
Different mechanical versions available

Encoder MRE

Encoder EMA

Single turn magnetic encoders

Encoder EMA

Encoder EMA

Several mechanical versions
Supply voltage 5Vdc or 10/24Vdc or 5/24Vdc
Resolution: 4÷ 13 bit, binary code
5V SSI Serial output

Encoder EMA

Encoder RM36

36 mm diameter

Encoder RM36

Encoder RM36

Ø 36 mm body, single turn absolute encoder
RM36-P: 9 bit parallel output
RM36-S: 12 bit SSI serial output
RM36-V: voltage analogue output
24Vdc or 5 Vdc supply

Encoder RM36

Encoder RM22

22 mm diameter

Encoder RM22

Encoder RM22

Ø 22 mm body, single turn absolute encoder
RM22-P: 9 bit parallel output
RM22-S: 9 bit SSI serial output
RM22-A: sin/cos analogue output
RM22-V: voltage analogue output
5 Vdc supply voltage

Encoder RM22

Incremental encoders

Incremental rotary encoders

Trasduttori Elap

Trasduttori Elap

Incremental encoders are rotary transducers used to releave length or thickness measures, angles and speed.Incremental encoders are commonly employed on industrial operating machines, combined to counting, visualizing orcontrol systems, to achieve programmed positionings, preset step shifts or simply to display measures of physical magnitudes.
Thanks to the innovative electronic circuitry and the excellent quality of the components, Elap encoders ensure high resolution, great accuracy and repeatability.
The wide choice of mechanical and electronic solutionsallows to meet all application requirements.

Encoder E620

63.5×63.5 mm square flange

Encoder E620

Encoder E620

E620, 63.5 x 63.5 mm square flange,
centering mask Ø 31.75 mm

E650, 63.5 x 63.5 mm square flange
centering mask Ø 50 mm

Shaft Ø: 6 – 8 – 9,52 – 10 mm
Pulses per revolution: 2 ÷ 36000

Encoder E620

Encoder E520

Ø 58 mm round flange

Encoder E520

Encoder E520

E520, servo coupling, Ø 58 mm round flange, Ø 50 mm centering mask
E540, servo coupling, Ø 58 mm round flange, Ø 36 mm centering mask
E510, servo coupling, Ø 58 mm round flange, Ø 31.75 mm centering mask
Shaft Ø: 6 – 8 – 9.52 – 10 mm
RE530, flange type RE0444, Shaft Ø: 11 mm
Pulses per revolution: 2 ÷ 36000

Encoder E520

Encoder SEB/SEB-Z

Ø 50 mm

Encoder SEB

Encoder SEB

50 mm Ø round flange 
Ø 10 mm shaft
ABS plastic case
IP64 protection degree – optional IP65
Axial or radial cable or connector outlet
Output signals: NPN open collectorPush-PullLine-driver
Pulses per revolution: 2 ÷ 10000

Encoder SEB/SEB-Z

Encoder E40

Ø 40 mm

Encoder E40

Encoder E40

E40, Ø 40 mm round flange, 6 holes on Ø 30 mm
E40A, Ø 40 mm round flange, 4 holes on Ø 25.4 mm
E40V, Ø 40 mm round flange, M18x1 screw coupling – Shaft Ø: 6 mm optional 4 mm
E40M, Hollow shaft encoder for motor coupling – Shaft Ø: 6 or 8 mm
Pulses per revolution: 5 ÷ 10000

Encoder E40

Encoder E320

Ø 38 mm

Encoder E320

Encoder E320

E320: Ø 38 mm round flange, 4 M3 holes on Ø 30 mm
Ø 6 mm shaft
Radial cable outlte
Output signals: NPN open collector, NPN pull-up collector, push-pull, line driver
Pulses per revolution: 2 ÷ 1024
IP53 Protection degree

Encoder E320

Encoder E30

Ø 30 mm

Encoder E30

Encoder E30

E30, Ø 30 mm round flange
Ø 4mm shaft
Axial or radial cable outlet
Push-pullopen collector NPN,line driver output signals
2 ÷ 10000 pulses per revolution
IP54 protection degree

Encoder E30

Encoder RM36

36 mm diameter

Incremental encoder RM36

Incremental encoder RM36

Ø 36 mm body, single turn absolute encoder
RM36-I: incremental encoder
Pulses per revolution: 128 – 512 – 1024 – 5 V line driver output signal –5 Vdc supply voltage

Encoder RM36

Encoder RM22

22 mm diameter

Incremental encoder RM22

Incremental encoder RM22

Ø 22 mm body
RM22-I: incremental, 128 pulses per revolution
5 V line driver output signal
5 Vdc supply voltage

Encoder RM22

E400/E410/E430/E470

Hollow shaft

Encoder E400

Encoder E400

E400 – Joint for motor coupling,
Ø 53.5 mm flange,
E470 – Joint for motor coupling,
Ø 72 mm flange,
E410 – Hollow shaft for motor coupling
E430 – Hollow shaft for motor coupling
Fixing by elastic support

Pulses per revolution: 2 ÷ 36000

E400 – E410 – E430 – E470

Encoder REV

High ppr and glass disc

Encoder REV

Encoder REV

Aluminium case
Glass measuring disc
Pulses per revolution: 1000 ÷ 36000
Several mechanical versions available

Encoder REV

Encoder EP – REP

Programmable encoders

Encoder EP521

Encoder EP521

Number of ppr programmable by the user
Pulses per revolution: 8 ÷ 2048
Output signals: push/pull or line driver
Several mechanical versions available

Encoder EP – REP

Encoder EM – REM

Magnetic incremental encoders

Encoder EM520

Encoder EM520

Several mechanical versions available
Supply voltage: 5Vdc or 8/24Vdc or 5/24Vdc
Output signals: push-pull or line driver
Pulses per revolution: 8 ÷ 2048

Encoder EM – REM

Linear transducers

Incremental linear transducers

Linear transducers

Linear transducers

Incremental linear transducers are usually employed on industrial operating machines. Combined to counting,visualizing and control systems they allow to achieve programmedpositionings, pre-determined step shifts and to display length or thickness measures.

Elap linear transducers range includes several sensors type:magnetic transducersdigital transducerswire sensorsand optical scales. Each position sensor can be supplied with different strokes and resolution values.

Linear transducers series PD – PE

Linear transducers PD

Linear transducers PD

High reading resolution(up to 0.005 mm)
Easy mounting method
Hig protection against environmental agents (IP65)
Strokes: 60 ÷ 990 mm

Linear transducers series PD – PE

TMP + MP200 Magnetic transducer

TMP + MP200 magnetic transducer

TMP + MP200 magnetic transducer

The linear magnetic measuring system TM+MP200 consists of themagnetic transducer TM and themagnetic band MP200.

TMP + MP200 Magnetic transducer

Optical scale series KD

Optical scale series KD

Optical scale series KD

The linear optical readers series KD are accurate and reliable, especially suited for applications in severe industrial environments.

Optical scale series KD

Optical scale series KP

Optical scale series KP

Optical scale series KP

The optical linear scales series KP are accurate and reliable. Thanks to theircompact dimensions they can be applied even onsmall-sized machine tools(millers, lathes, grinders, spark erosion machines…).

Optical scale series KP

Wire transducers

Linear wire transducers

Linear wire transducers

Linear wire transducers

Stout, easy to install, highly protected againstenvironmental agentsELAP linear wire transducers series HLS and HPS are the ideal solution for thoseindustrial applications which require high accuracy and measuring length up to 12 metres; typical applications are: X-Y tables, hydraulic and pnematic cylinders, packing machines, and wood-, glass-, marble-, sheet-working machineries.
The transducer consists of an encoder or a potentiometeroperated by means of a wire-reel mechanism; the wire is out of stainless steel covered with nylon.
The potentiometer HPS provides an analogue signal proportional to the linear displacement of the wire, while theencoder HLS provides a number of pulses proportional to the linear displacement of the wire. The inside spring controls the return of the wire to the starting position.
For both types the travel speed is 1000/2000 mm/sec., depending on the stroke, and the protection degree granted by the stout anodysed aluminium case is IP64. The connection is by means of a cable 1 m long. The operators will surely appreciate the mounting method, which is particularly easy.

Wire encoder HLS

Wire encoder HLS

Wire encoder HLS

Strokes ranging from 1000 mm to12 m
Resolution: 0.04 ÷ 1 mm
Series HLS-S: 1000 mm stroke
Series HLS-M: 500 ÷ 5000 mm stroke
Series HLS-L: 6000 ÷ 12000 mm stroke

Wire encoder HLS

Wire potentiometer HPS

Wire potentiometer HPS

Wire potentiometer HPS

Strokes ranging from 250 mm to8 m
Resistance 5 KOhm ±10%
Linearity ±0,02% FS
Series HPS-S: 250 ÷ 1000 mm stroke
Series HPS-M: 500 ÷ 4000 mm stroke
Serie HPS-L: 3000 ÷ 8000 mm stroke

Wire potentiometer HPS

Linear potentiometers

Linear motion potentiometers

Linear potentiometers

Linear potentiometers

Widely employed on industrial operating machineslinear motion potentiometers are specially designed to measure and control linear displacements in absolute mode. Since they are absolute detecting systems,potentiometers keep the actual position data at power off: therefore they are peculiarly suited to be employed on machines where it is difficult to reset the axis zero point at the system power on, for instance if the material machining lasts for long. ELAP offer in terms of linear motion potentiometers includes a variety of mechanical sizes, strokes, resistive values and mounting fittings to meet any application requirement: there are square or round section potentiometerssmall-sized potentiometers, with measuring strokes ranging from 25 to 950 mm.

PLS Series

Square section case

PLS Series

PLS Series

50 ÷ 950 mm strokes
31 mm square section case
6 mm diameter shaft
Axial connector outlet
IP65 protection degree

PLS Series

PL2S Series

2 ball joints

PL2S Series

PL2S Series

50 ÷ 500 mm strokes
31 mm square section case
2 fixing ball joints at the ends
6 mm diameter shaft
Radial connector outlet
IP65 protection degree

PL2S Series

PL231 Series

2 ball joints

PL231 Series

PL231 Series

50 ÷ 750 mm strokes
31 mm square section case
2 fixing ball joints at the ends
8 mm diameter shaft
Radial connector outlet
IP65 protection degree

PL231 Series

PM Series

Small size

PM Series

PM Series

Compact dimensions 
21 mm square section case
25 to 150 mm strokes
5 mm diameter shaft
Radial connector outlet
IP63 protection degree

PM Series

PM2S Series

Small size – 2 ball joints

PM2S Series

PM2S Series

Compact dimensions 
21 mm square section case
25 to 150 mm strokes
5 mm diameter shaft
2 ball joints at the ends
Radial connector outlet
IP63 protection degree

PM2S Series

PR Series

Round section

PR Series

PR Series

26 mm diameter round section case
25 to 150 mm strokes
5 mm diameter shaft
Radial connector outlet
IP65 protection degree

PR Series

PR2S Series

Round section – 2 ball joints

PR2S Series

PR2S Series

26 mm diameter round section case
25 to 150 mm strokes
5 mm diameter shaft
Radial connector outlet
Two ball joints at the ends
IP65 protection degree

PR2S Series

PLS-V Series

Linear potentiometers with analogue output

PLS-V Series

PLS-V Series

Strokes: 50 to 950 mm
Supply voltage 18÷30Vdc 
Output: 0÷10dc max.10 mA proportional to the reached position
Accuracy: ±0,25% of the measured value
Protection degree: IP65

PLS-V Series

PLC axes controllers

PLC single and multi-axes controllers

PLC axis controllers

Nexus, Lynx, Vega, Neos

NEXUSLYNXVEGA and NEOSElap comprehensive series ofmulti-function controllers were designed to make the programming operations and work cycle control easy. All the different versions – for the control of one, two or four axes – avail on a powerful and flexible PLC and on a thoroughlyconfigurable graphical interface: all the systems can be completely set up to fit perfectly in the multi-faceted application realities. The Modbus RTU and CANopencommunication protocols allow for the controllers connectivity.

PLC single and multi-axes controllers

Nexus

2 – 4 Axes

Nexus 2 - 4 Axes

Nexus 2 – 4 Axes

Nexus controls two to four axes by means of its analogue outputs, and can be successfully applied on any kind of industrial processing machines.

Nexus

Lynx

1 – 2 Axes

Lynx 1 - 2 Axes

Lynx 1 – 2 Axes

LYNX efficientlycontrols one or two digital axes by means of its analogue outputs.

Lynx

Vega+

1 – 2 Axes

Vega+ 1 - 2 Axes

Vega+ 1 – 2 Axes

New graphical design and a powerful man-machine interface are the main features of the new controller VEGA+. The wide TFTcolor display is rear-lighted, 4.2 inch wide, with 432×240 pixel resolution and 65000 colours. Its touch screenfunctions are easily set by means of a dedicated program.

Vega+

Vega

1 – 2 Axes

Vega 1 - 2 Axes

Vega 1 – 2 Axes

The small-sized, powerful and versatilecontroller VEGA runs the automatic operation of machines and production systems of all industrial sectors.
In addition to the usual logical, timing and counting operations, its embedded PLCperforms a series of advanced operations, making it possible to engineer complex applications in a simple and direct way.

Vega

Neos

1 Axes

Neos 1 Axes

Neos 1 Axes

Small-sized and compact-shapedNEOSfeatures a single axis controller with great potential. Its embedded PLC allows to configure several functional options, tailoringNEOS for any application in thecounting and positioning field as well as for the development of simple logic circuits.

Neos

Counters & visualizers

Counters & visualizers

Counters & Visualizers

Counters & Visualizers

Combined to digital or analogue transducers ELAP counters and readoutssolve all the problems related to counting and displaying lengths or tickness measures, as well as machined pieces numbers. Their application field is virtually infinite, as they can profitably be employed on any industrial machine performing cutting tasks, preset measure machining, dosing, packing, or coiling.

ELAP offer in the counting and positioning field has developed in the years, starting from the earliest electro-mechanical counters to the up-to-datemicroprocessor electronic counters with functions settable by the user.

Counters & visualizers

CM78

Multi-functional counter/visualizer

CM 78

CM 78

6 displayed digits
Several application programs available
2 presets
Settable operational modes

CM78

CM78N

Multi-functional counter/visualizer

CM78N

CM78N

6 displayed digits
Counter or positioner type available
2 presets
Settable operational modes

CM78N

Series VD4

Digital readouts

Series VD4

Series VD4

Display of direct currentdirect voltagepotentiometer signal, frequency
Analogue or digital signals reading
Versions with 2 relay outputs available
Display range: four digits, with or without – indication (-9999/9999)

Series VD4

Series VD3

Digital readouts

Series VD3

Series VD3

Display of direct currentdirect voltagepotentiometer signal
Display range: three digits with or without – indication (-9999/9999) or three digits and a half (1999)

Series VD3

CM6

Microprocessor counter

CM6

CM6

6 displayed digits
2 presets
Settable operational modes

CM6

Positioners

Single and multi-axis positioners

Single and multi-axis positioners

Single and multi-axis positioners

Elap positioners range includes includes several PLC programmable equipments, which can be easily fit into the variegated application realities you can meet in industrial automation.

The single axis controller NEOS and the 1 /2-axis controller VEGA are amongELAP most advanced positioners: different programs are available to run on/off positioning and analogueoutput positioning as well as algorithms for specific functions (eg. Cutting banks, trigonometric functions). Special customer programs can be developed by our technical staff or directly by the user.

Neos

Single axis positioner/controller

Neos 1 Axes

Neos 1 Axes

Control over 1 axis 
Embedded PLC 

Graphical display
Applications programs available

Neos

Vega

Positioner/controller

Vega 1 - 2 Axes

Vega 1 – 2 Axes

Control over 1-2 axes
Embedded PLC
Graphical display
Applications programs available

Vega

CM72 – CM73 – CM74

Single axis positioners/counters

CM 72 - CM 73 - CM 74

CM72 – CM73 – CM74

Different hardware versions
Several programs available
RS232 serial line

CM72 – CM73 – CM74

CM76 – CM77

Single axis positioners

CM 76 - CM 77

CM 76 – CM 77

Different hardware versions
Several software programs available
RS232 Serial line

CM76 – CM77

AE91

Synchronization axis

Electric axis AE 91

Electric axis AE 91

Speed and space synchronisation control
Eurocard format
RS232 Serial line

AE91

Elap encoder, Italy, Vietnam, ANS Vietnam, Germany, USA, Asia, Vietnam, Singapore, Japan, Cambodia, Laos, Thailand, Myanmar, Indonesia, Malaysia, Singapore, China, India, Pakistan, Egypt, Iran, Jordan, Saudi Arabia, Sudan Syria, Iraq, Sudan

Hãy liên hệ với chúng tôi để có được giá tốt nhất !

Logo ANS

Công Ty TNHH TMDV Anh Nghi Sơn

địa chỉ | D3, Đinh Tiên Hoàng, KDC Miếu Nổi, Phường 3, Quận Bình Thạnh, TPHCM

| mã số thuế | 0310692382

| điện thoại | + 84 . 8 . 3517 0401/02 | fax | +84 . 8 . 3517 0403

email | sales.ans@ansvietnam.com ans.vina@ansvietnam.com

| website | http://www.ansvietnam.com http://www.anhnghison.com
liên hệ trực tuyến | Skype | Yahoo

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: